HUIYUE (DongGuan City) Automation Equipment Co., Ltd.
Description
KP8031 Needle flame test machine
Overview:
In the product due to a failure conditions, such as fault current leakage path under the component or components overheating, poor contact, etc. are likely to cause fire, it may well incident on nearby parts, the needle flame test simulates the inside of the product in a small flame under fault conditions generated by technology assessment of fire risk. For small parts (or components) glow-wire test or horizontal - vertical burning test method is not suitable, the needle flame test method references. If the test sample during the glow wire ignition test, the combustion dangerous situation arising from the need to use the needle flame test. Needle flame test apparatus suitable for electric and electronic products, household appliances, spare parts and components, such as: wiring boards, centrifugal switch, electric cooker socket ......
Standard: GB / T5169.5-2008, IEC60695-2-2
Device parameters:
A burner: length 35mm, inner diameter: 0.5mm.
Second, the standard flame lit: flame height 12mm
Third, the temperature measuring device: 1, thermocouple type of armored ?0.5mmK filaments, measuring temperature: 1050 ? 2, the heat transfer copper block: ?4.0x6.0mm
Four, heating rate: 100 ~ 700 ? to 23.5S
Fifth, the chamber volume: 0.5M3, depth x width x height: 60x 95x 90cm
Six Dimensions: D x W x H: 61x 120x 105cm
Seven Carton Material: electrostatic paint and stainless steel mirror. According to customer requirements and business talk given situation and chosen
Overview:
In the product due to a failure conditions, such as fault current leakage path under the component or components overheating, poor contact, etc. are likely to cause fire, it may well incident on nearby parts, the needle flame test simulates the inside of the product in a small flame under fault conditions generated by technology assessment of fire risk. For small parts (or components) glow-wire test or horizontal - vertical burning test method is not suitable, the needle flame test method references. If the test sample during the glow wire ignition test, the combustion dangerous situation arising from the need to use the needle flame test. Needle flame test apparatus suitable for electric and electronic products, household appliances, spare parts and components, such as: wiring boards, centrifugal switch, electric cooker socket ......
Standard: GB / T5169.5-2008, IEC60695-2-2
Device parameters:
A burner: length 35mm, inner diameter: 0.5mm.
Second, the standard flame lit: flame height 12mm
Third, the temperature measuring device: 1, thermocouple type of armored ?0.5mmK filaments, measuring temperature: 1050 ? 2, the heat transfer copper block: ?4.0x6.0mm
Four, heating rate: 100 ~ 700 ? to 23.5S
Fifth, the chamber volume: 0.5M3, depth x width x height: 60x 95x 90cm
Six Dimensions: D x W x H: 61x 120x 105cm
Seven Carton Material: electrostatic paint and stainless steel mirror. According to customer requirements and business talk given situation and chosen
