vacuum varnish impregnation machine instructions:

  Huiyue Technology automatic vacuum impregnation machine has the distinction between double cylinder and single cylinder. If the product quantity is large, it is recommended to use double cylinder efficiency much faster, because the two cylinders use PLC controller to operate two cylinders at the same time, and also Operating a single cylinder without the need for manual step-by-step operation, simply press the start button to complete the process.

Huiyue automatic double cylinder vacuum impregnation machine main screen display picture:

     After pressing the button or the external start button on the screen, the tray is reset. After the reset is successful, the status window displays “Manual Control”, and the manual button can be pressed to perform manual control.
Press the button or the external start button again to start the machine automatically. During the reset or auto run, the screen manual button can only display the status and cannot be manually operated. Press the screen button or the external emergency stop button, the machine will stop running.

If a fault occurs during reset or automatic operation, the machine stops running and the cause of the fault is displayed in the status window. The corresponding part of the graph will also turn red and flash.