How do ordinary factory experimental combustion characteristics of automotive interior materials it (GB 8410)?
The
vast majority of car interiors, both with flammability, if you do not
take some means of delaying these combustible materials burning rate, in
case of an accident, the consequences would be more serious. For this reason, for the combustion characteristics of automotive interior materials make the appropriate standard. According
to the national mandatory standards GB 8410-2006 "combustion
characteristics of automotive interior materials," automotive interior
materials burning rate shall not exceed 100mm / min. Branch Instruments products to provide you with the national standard
GB8410 fire testing automotive materials testing equipment KP8037
automotive interior materials burning test machine, Tel: 0769-88034181.
GB 8410-2006 sample size and counting
Sample
size and quantity: 102mm × 356mm × thickness (specimen in the car
practical application thickness, but is not 13mm, if greater than 13 mm,
will have to cut to 13 mm.) At least 10 samples, if there are different
directions different burning speeds in different directions will have to be sampled in each direction at least 10 samples. If the size of the material does not meet the test requirements to make the sample tested in accordance with requirements.
GB 8410-2006 standards
GB 8410-2006 Flammability of automotive interior materials
Combustion characteristics of automotive interior materials GB 8410-2006
Federal motor vehicle safety standard (49 CFR part 571) MVSS302-flammability of interior materials.
FMVSS 571.302 federal transportation vehicle interior materials combustion performance tests.
CMVSS302 Canadian Motor Vehicle Safety Standard of No.302, Flammability of interior materials.
Transport Canada CMVSS 302 combustion performance vehicle interior materials.
Combustion characteristics of automotive interior materials GB 8410-2006
GB 8410-2006 Flammability of automotive interior materials
GB
8410-2006 standard corresponding to the combustion characteristics of
the US Federal Motor Vehicle Safety Standard FMVSS571.302 automotive
interior materials. This standard replaces GB8410-1994 combustion characteristics of automotive interior materials.
Federal motor vehicle safety standard (49 CFR part 571) MVSS302-flammability of interior materials.
FMVSS 571.302 federal transportation vehicle interior materials combustion performance tests.
GB
8410-2006 standard specifies the technical requirements and test
methods for automotive interior material level of combustion
characteristics. This standard applies to assess the level of automotive interior materials combustion characteristics.
GB 8410-2006 Technical Requirements
Combustion characteristics of interior materials must meet the following requirements:
Burning rate is not more than 100mm / min.
Classification
- Contact
HUIYUE (DongGuan City) Automation Equipment Co., Ltd.
Phone: 0086+15916737121
TEL: 0086+076989870552
FAX: 0086+076986475353
Zip Code: 523900
Email: cr@hyefw.com
Address: 3rd Floor, Building B, No. 6, Dabandi 1 Road, Xiabian, Chang'an Town, Dongguan City, Guangdong Province , China
Location：Home >> Info >> product information >> How do ordinary factory experimental combustion characteristics of automotive interior materials it (GB 8410)? The vast majority of car interiors, both with flammability, if you do not take some means of delaying these combustible materials burning rate,
How do ordinary factory experimental combustion characteristics of automotive interior materials it (GB 8410)? The vast majority of car interiors, both with flammability, if you do not take some means of delaying these combustible materials burning rate,
Hit： Data：2016-06-01 【print】
Previous：Single wire or cable vertical burning test machine operating instructions
Next：General structure of 13 meters special tunnel furnace transformer
