HUIYUE (DongGuan City) Automation Equipment Co., Ltd.Dongguan Huiyue Technology specializing in the production of vacuum impregnation machine, automatic vacuum impregnation machine and manual vacuum impregnation machine, today by the small series to introduce you with automatic vacuum impregnation machine and manual vacuum impregnation machine What is the difference?
Automatic vacuum impregnation machine is controlled by the PLC, the controller can store 0-500 products, cylinder size can be customized according to customer requirements.
Automatic vacuum impregnation machine features:
1. The use of stepper motor drive precision ball screw drive sub-tank lift-type impregnation, can be preset height; can be preset height (sub-groove maximum stroke 60mm; displacement accuracy of ± 0.05mm)
2. Spiral lift bearing force, high control accuracy, PIN will not stick to the vertical water, not the second tin.
3. All Chinese PLC control, intelligent vacuum, to achieve no bubble where the water, impregnated with beautiful effect. Automatic double cylinder vacuum impregnation machine
4. Automatic switch cover, the second automatic vacuum, saving time and effort, environmental protection, energy saving, single-person multi-machine operation can be achieved.
5. Trough the overall use of 10MM steel production. Double glass viewing window can be viewed at any time soaking
Automatic vacuum impregnation machine Operation:
(1) First, the parameters of the product infiltration into the controller (vacuum time, exhaust time, soaking time, defoaming time).
(2) the parameters set, just a (start) button to complete a series of products impregnated.
(3) automatic alarm, automatically open the lid, manually remove the product to complete.
Automatic vacuum impregnation machine
Manual vacuum impregnation machine Features:
1, with 50KG hydraulic rod support roof.
2, the top cover surrounded by silicone rubber seal, fast clip off cover.
3, the body has: manual function.
......................
Manual vacuum impregnation machine Operation:
, Open the impregnated cover, will be placed neatly into the cylinder block products impregnated plate. Close the immersion cover and lock the quick clip.
2, twist the start switch, vacuum pump start. When the pressure gauge is displayed to 30-40mmhg, open the bottom of the cylinder valve switch, so that where the water pumped into the cylinder.
3, twist the spotlight switch, through the cover glass observation, when where the amount of water to reach the required volume, close the cylinder valve switch down.
4, when the barometer pointer to 700mmhg or more, press the start switch to stop. When the vacuum infusion time reaches the set time, it will alarm. Open the cover on the ball valve switch, exhaust gas, when the pressure gauge pointer to 0mmhg. Open the bottom of the cylinder valve switch, the cylinder where the water put up legislation, close the ball valve switch.
5, the start switch is turned on, the vacuum pump starts. When the pressure gauge pointer reaches 700mmhg or more, press the stop button twice. When the vacuum reaches the set time, the alarm will be opened and the ball valve switch will be opened to discharge the gas.
6, vacuum is completed, open the cylinder head, remove the product, the operation is completed.
