HUIYUE (DongGuan City) Automation Equipment Co., Ltd.
Description
KP8120 hot rod method for flammability of plastics testing machine
Applicable Standards
Determination GB T 2407-2008 plastic rigid plastic when small specimens in contact with a hot rod combustion characteristics
GB T 6011-2005 Test method for flammability of plastic fiber reinforced Incandescent rod
The main purpose
For plastic combustion performance test measurement performed using hot rods. For the plastics industry product testing, inspection departments and research units.
experiment method
With a diameter of 8mm and a temperature of 960 ? of hot rod as the ignition source to the end face of the sample in contact 3min, then turned away from the sample holding hot rod, hot rods began when in contact with the sample, observe and record burning behavior of the sample, according to the combustion conditions, the combustion properties of the sample were determined.
Technical Specifications
1, silicon carbide diameter: 8mm, length 100mm, AC and DC can be temperature controlled.
2, test temperature: 950 ± 10 ?.
3, sample size: length 125mm, width 10mm, thickness 4mm; test sample for the test 2mm-10mm can also be performed, but the results only with the same thickness of the sample test results were compared.
4, silicon carbide and the sample contact time: 3min.
Applicable Standards
Determination GB T 2407-2008 plastic rigid plastic when small specimens in contact with a hot rod combustion characteristics
GB T 6011-2005 Test method for flammability of plastic fiber reinforced Incandescent rod
The main purpose
For plastic combustion performance test measurement performed using hot rods. For the plastics industry product testing, inspection departments and research units.
experiment method
With a diameter of 8mm and a temperature of 960 ? of hot rod as the ignition source to the end face of the sample in contact 3min, then turned away from the sample holding hot rod, hot rods began when in contact with the sample, observe and record burning behavior of the sample, according to the combustion conditions, the combustion properties of the sample were determined.
Technical Specifications
1, silicon carbide diameter: 8mm, length 100mm, AC and DC can be temperature controlled.
2, test temperature: 950 ± 10 ?.
3, sample size: length 125mm, width 10mm, thickness 4mm; test sample for the test 2mm-10mm can also be performed, but the results only with the same thickness of the sample test results were compared.
4, silicon carbide and the sample contact time: 3min.
