Introduction of HY-R06 Transformer CNC Winding Machine

Main feature

Designed with a single-chip microprocessor, it is powerful, compact, and resistant to interference.
The memory uses FLASH ROM, the capacity is large, and the winding data of 1000 steps can be stored. Each step is set with 9 kinds of winding data, and 5 kinds of functions are selected. After the power is cut off, the winding data will not be lost.
It can change the operation and operation mode for different models and occasions, and it can be used in a wider range.
The winding shaft provides 100 winding speed selection, and the high speed and low speed of each step can be set deeply.
The bobbin provides 100 segments of acceleration slope selection for smoother winding operation.
The counting resolution is high, up to 0.05 laps.
The cable shaft stepper motor driver is driven at a constant current to provide high speed, high torque and high precision positioning.
The position of the cable axis can be set by teaching or button, and the data display window can display the current position of the cable axis.
The cable spool provides a 99-segment positioning speed selection.
The cable shaft displacement unit has a wide range of settings and is suitable for various types of screws.
With power-off memory function, sudden power-off during winding, can remember the current state, parameters and save, wait for power-on, start to continue to wind the product, reduce raw material waste.
A set of edit password settings to prevent the settings from being arbitrarily changed.
Strong compatibility, can directly replace the same type of controller.

The power supply can be divided into AC 100 ~ 200V and 220V ~ 240V models.