Operation procedure of double cylinder automatic vacuum dipping machine

Our Dongguan Huiyue automation technology equipment has the most humanized automation technology products, model HY-Z03 double-cylinder automatic vacuum dip paint machine, which has been controlled by touch screen panel. Advanced Chinese and English PLC control, intelligent vacuum pumping. The following is the basic operating procedures of the dip machine:

Two-cylinder automatic vacuum dipping machine basic operation procedure
1. Turn on the three-phase main power supply, open the panel power switch, open the intake valve, automatically open the impregnation cover, and manually put the impregnated material.
2. Press Start to close the Immersion Box Cover, close the intake valve, and open the suction valve. Set the required parameters in the control interface.
3. If you need to observe the specific conditions of the cylinder, you can observe it from the viewing window.
4. The machine runs automatically according to the setup program and manual operation is not possible. If you need manual operation, please stop automatic operation first.
5. Automatic running program: put into the product - cover - vacuum - motor lift pre-dip height - defoaming time - defoaming interval - number of soaking - motor soaking height - soaking time - dip Discharge time - dip interval - dip interval - exhaust - vacuum 2 - drip dry - exhaust 2 -