How is the positioning of the nozzle and thread of the machine automatically?-Info-HYE high-frequency transformer automation equipment manufacturers

How is the positioning of the nozzle and thread of the machine automatically?

I Division of the more efficient technology to wear casing machine is a microcomputer control, the whole Chinese NC single-chip control display, easy to operate; casing size can be adjusted for the vast majority of casing transformer production; the automatic wear machine with CNC Convenient, quick start, to ensure quality, improve production efficiency. How is the positioning of the nozzle and thread of the automatic threading machine? The following by Hui Yue Xiaobian to tell you about.

1, the general machine with thread mouth, nozzle can be moved up and down the structure. The nozzle nozzle can not be done before and after the positioning, in the installation of mouth and mouth when relying on experience to determine the tip of the nozzle tip to the pressure knife knife distance.

Reason: the use of a single block structure, the carrier surface is a fixed plane can not be adjusted, the replacement of line species and pipe when the diameter and diameter with the diameter of the increase in the center of the relative surface of the surface of the formation of tolerance But also need to adjust the mouth and nozzle with the relative height of the surface, the machine can be a smooth pipe and threading. (Do not adjust up and down, even if the line is close to the tube and can not use)

2, fool machine with thread mouth, nozzle fixed structure, and the mouth of the mouth of the mouth to do the installation and positioning methods to ensure that the installation is completed after the mouth and nozzle to cut the distance between the knife fixed distance (nozzle 0.3mm line Mouth 0.1mm)

Reason: The double-action structure is used to ensure that the fixed value of the relative height of the mouthpiece and nozzle and the V-shaped carrier surface is changed.


HUIYUE	KEPIN