HUIYUE (DongGuan City) Automation Equipment Co., Ltd.
1, regularly check whether the lamp does not light the existence of detection methods: in the heating process, see the ammeter current is normal, such as abnormal observation of whether the phenomenon of light does not light, to be checked.
2, regularly check the transmission chain and stainless steel conveyor is intact, regularly replace the gear oil (1/3 months, except gear reducer).
3, the machine side of the plate with a tight fit, to prevent unintentional personnel will be stored in debris to the machine.
4, mobile machine, the correct method of operation: adjust the foot cup, so that the foot cup from the ground more than 50mm, and then move the machine, positioning and then adjust the foot cup equipment to maintain the level of the wheel about 10mm away from the ground.
5, repair and maintenance of the machine to be opened part of the furnace body, the correct method of operation:
(1) three or more personnel to prepare strong support rod 2.
(2) to open the handle bar, two people will open up the furnace, the third person will support the stability of support, one end of the stays to the furnace, one end of the support bracket.
(3) to carry out the relevant maintenance overhaul, after cleaning debris and dust.
(4) down, the two propped up the furnace, a person removed the support rod, and then slowly down the furnace.
(5) only deal with a furnace at a time to ensure safety, after the OK.
(6) every six months with alcohol wipe a lamp, to ensure that the baking effect.
Division I Dongguan Huiyue tunnel furnace drying line after-sales quality commitment: one year free warranty, life-long service! Our aim: the pursuit of excellence, quality products to the future casting!
